Mini-Z AWD Nissan Skyline GT-R V-Spec II MA-020 Initial D Drift Car, Initial D/Black

The chassis is equipped with the VCS front suspension for better road holding and smoother suspension stroke, and drift tires are mounted as standard, so it is ready for drifting out of the box. 14 pieces of ball bearings are installed to make the power train friction free, resulting in higher top speed, better fuel economy, and less motor loads and heat. If you think drifting is difficult, no worries, you have a solution. The new RX-ESC unit is equipped with a gyro socket and an adjustment volume. As soon as you install an optional gyro unit (MZW711), you will quickly become a drifting expert. The gyro sensor detects the yaw rate of the car and automatically corrects the steering angle for you. So, even if you are not a skilled driver, you can surely enjoy smooth and fun drifting. Also, it is very easy to adjust the gyro effect. You can increase or decrease the effect by just turning a tiny volume with a tool enclosed. No PC or any external equipment is necessary. The set contains 20 pcs of red cones. Make a gymkhana course with them and sharpen your drifting skills!Includes: Almost-factory-assembled chassis equipped with KT-531P compatible Rx-ESC unit Pinion Gears (15T, 17T, 19T, 21T) Spur Gears (27T, 29T, 31T for M and L wheelbases) Wheel wrench Front tread conversion parts Required to Complete:8 x AAA batteriesFeatures: KT-531P Transmitter (control knobs: steering/throttle trim, steering D/R, light flashing speed) Full ball bearings. (14 pcs) MA-020 based chassis with VCS front suspension 20 pcs of 25mm-height red cones included. Gyro control volume equipped on the RX unit for optional gyro unit Socket for optional LED unit (MZW429R) equipped on the RX unit. LED unit is compatible with the body Specifications: Scale: 1/27.6 Length: 165.0mm Width: 71.0mm Height: 50.0mm Chassis Type: MA-020 Wheelbase: 94.0mm (L) Tread (F):59.5 Tread (R):59.5mm Weight: 193g 130 class motor Gear Ratio: 7.2, 6.4, 6.0, 5.7, 5.3, 5.0, 4.5:1 Tire Diameter (F/R): 25.0mm/25.0mm Tire Width (F/R):8.5mm/8.5mm Transmitter: KT-531P Top speed: approx. 17km/h Runtime: approx. 50min.

Precision ball bearings for high drive efficiency

Updated circuit board with optimized steering control

Front suspension coil spring can be replaced without tools

Ready-to-run design with minimal setup required

High-quality, display-level finish on the body

Advanced steering control for responsive handling

Compatible with a wide range of optional tuning parts

Includes drift tires for immediate sideways action

Pre-painted V-SPECII Initial D Skyline body with factory-applied decals for authenticity

Scale :: Mini-Z

Drive :: AWD

Length :: 6.5in (165mm)

Wheelbase :: 3.7in (94mm) L

Width :: 2.8in (71mm)

Height :: 1.97in (50mm)

Motor: :: Brushed

ESC :: Brushed

Front :: Narrow +1.5mm

Rear :: Narrow +1.5mm

Assembly Level :: RTR

*Tech Note: Ready-to-Run models come equipped with all electronics and include the transmitter needed for use. Please check the "Needed To Complete" above to make sure you have everything you need to get out and enjoy your RC model.

(1) MA-020 AWD Mini-Z ReadySet with V-SPECII Initial D Skyline GT-R R32 Body

(1) 2.4GHz Syncro KT-531P transmitter

(4) Drift Tires (installed)

(4) Pinion Gears (15T, 17T, 19T, 21T)

(3) Spur Gears for Wheelbases: 27T, 29T, 31T for M, L

(1) Pinion Gear Tool

Spare Wheel Nuts

Wheel Wrench

(4) AAA batteries for Chassis

(4) AAA batteries for Transmitter

Brand: Kyosho

MPN: 32652ID

Added: 2026 - September

Status: Stock

Discount Eligibility: Discount Eligible

SKU: KYO32652ID

UPC: 4548565490912

Location: Store