TRX-4 Chevrolet Blazer w/ Interior
MODEL 91076-4: TRX-4 Scale and Trail® crawler with 1972 Chevrolet® K5 Blazer body with interior: 1/10 scale 4X4 trail truck, fully-assembled, waterproof electronics, Ready-To-Drive®, with TQi™ 2.4 GHz 4-channel radio system, XL-5™ HV speed control, high/low transmission, remote-locking differentials, and painted clipless body.
Introduced in 1969, the Chevrolet® Blazer has become an off-road legend. Traxxas honors the rich history of the Blazer with a beautifully detailed 1972 Blazer clipless body on the renowned TRX-4® chassis. Outfitted with clear windows and a full interior, replica wheels, chrome grille, and a full complement of scale details, TRX-4 Blazer combines iconic style with TRX-4 capability.
TRX-4 1972 Chevrolet Blazer sets a new standard for scale authenticity with a beautiful replica body. Authentic chrome accents and molded inserts replicate the full-size truck in minute detail with clear windows to view the highly detailed interior.
TRX-4 Blazer's clipless body combines clean flowing lines with secure latching convenience. Hidden latches hold tight on the trail no matter how intense the action gets, but release in just seconds. The interior mounts securely inside the body and requires no extra steps to swap batteries.
The powerful 3s LiPo-capable XL-5™ HV ESC and 21-turn Titan® motor provide endless torque to tackle the steepest climbs and all-out speed on flat terrain. This efficient system provides up to 2 hours of run time with a Traxxas 3s 5000 mAh LiPo battery pack!
Portal axles lift the truck at the wheels for huge center pumpkin ground clearance. To achieve the same clearance with straight axles, the tires would have to be over an inch taller than the tires on TRX-4 Blazer.
Traxxas allows you to lock and unlock both the front and rear differentials remotely from your transmitter. New sleeved micro cables control the differential action for scale appearance, without limiting suspension articulation.
When the going gets tough, engage low range on the TQi transmitter for incredible 4WD pulling torque. Shift into high range for blasting down the trail. TRX-4 Blazer adapts to any situation or driving style.
TRX-4’s extreme off-road capability lies in the technology beneath its rugged exterior.
The TQi radio features cruise control for long-distance treks. Set your speed using the transmitter and then use the multi-function knob to fine-tune it. A grip-mounted rocker switch selects high or low range gears to suit the terrain while a separate toggle switch engages or disengages the locking differentials, all on the fly.
Blazer’s interior is a model of scale authenticity with molded details and decals. The interior mounts directly to Blazer’s support cage, making installation and removal quick and easy with no extra steps required.
Portal axles help raise the center ground clearance to an unparalleled 3.14″ (80 mm), while raised suspension links and driveshafts clear rocks underneath the chassis to avoid high centering. Superior capability equals more fun no matter where your adventure takes you.
TRX-4 Blazer features precision-molded chrome details for a whole new level of scale realism. Side mirrors, bumpers, and even windshield wipers give TRX-4 Blazer perfect scale authenticity.
TRX-4 Blazer’s 1.9″ chrome wheels with replica hub locker decals come pre-glued and mounted to aggressive, S1-compound Canyon Trail tires. Deep tread blocks flex for maximum traction on the rocks. The trail-tuned foam inserts provide realistic sidewall flex for authentic climbing action.
With a 59° out-of-box approach angle in the front, TRX-4 is ready to climb walls. An equally impressive departure angle provides extreme capability, even in the deepest ruts.
TRX-4 Blazer gets a replica chrome front grille with integrated headlight lenses for an authentic scale appearance. Detailed headlights and taillights accept the optional Pro Scale Light Kit (sold separately) for even more scale realism.
Tough inner fenders mount directly to the frame and shock towers to provide substantial look and feel to TRX-4. The authentic realism adds to the fun while also helping to keep rocks, mud, and twigs out of the chassis.
TRX-4’s main battery tray accommodates full-size LiPo batteries for extended run times or smaller 1/16 scale batteries for reduced weight. A hinged battery strap provides quick and secure battery mounting without pins to lose. A secondary front-mounted battery tray accepts smaller 1/16 scale batteries to position weight directly over the front axle for maximum climbing traction.
TRX-4 uses three waterproof micro servos to actuate the front and rear differentials as well as the high/low range selection on the transmission. Sleeved micro cables eliminate complicated linkages that would otherwise limit suspension articulation.
TRX-4 is fully waterproof, not “splash resistant.” There is a big difference. Traxxas’ patented innovation gives you the freedom to tackle creeks, snow, and mud without worrying about water in your electronics.
In addition to its three standard profiles (Sport, Race, Training Mode™), the XL-5 HV features a Trail profile that serves up a little bit of drag brake for smooth intuitive driving for most of your adventures. Crawl profile introduces hill hold and instant reverse for extremely technical courses.
Torque rules the trail and TRX-4’s massive Titan 21T motor pumps out huge torque to get you up and over anything that gets in the way. An integrated cooling fan keeps temperatures down for extended run times.
With the front differential unlocked, the superior 45° steering angle negotiates around even the tightest bends with ease. This helps avoid awkward reversing maneuvers in tight spaces.
Oil-filled coil-over GTS shocks deliver silky-smooth damping performance and feature threaded aluminum shock bodies for easy ride height adjustments. The shocks look great with and perform even better with an O-ring cap seal and dual X-ring shaft seals.
Thick 5 mm diameter steel links feature tough heavy-duty rod ends with steel hollow balls for exceptional strength and durability. This is one rig that won’t strand you on the trail with a broken suspension link.
A thick 1.5 mm steel ladder frame with molded cross members provides exceptional torsional rigidity to resist even the worst chassis twisting articulation. This extremely rigid backbone lets the suspension do the work it was designed to do.
Functional rock sliders help prevent damage and provide extra support for the body. The additional bracing adjusts for different widths.
A twin friction plate slipper clutch provides some additional protection from motor stalls in extreme crawling conditions.
Hardened steel U-joints on the front and rear driveshafts provide smooth, reliable power delivery for non-stop fun.
The steering link and drag link attach high on the portal axles, raising them away from possible damage. This allows TRX-4 to attack obstacles head on, reducing the risk of hitting the steering linkage on rocks.
This product may only be shipped within the United States. International orders will be cancelled and refunded.
Brand: Traxxas
MPN: 91076-4-BLK
Added: 2026 - October
Status: Stock
Discount Eligibility: Discount Ineligible
SKU: TRA91076-4-BLK
UPC: 020334066558
Location: E-TOP
Shipping Policies & Notices
Delivery & Shipping
Delivery & Shipping
- Free shipping on all orders over $49
- Same day shipping on orders placed by 2pm CST, Mon-Fri
- Free store pickup available at checkout
Technical & Warranty Info
Technical & Warranty Info
Technical and Warranty issues are handled by the manufacturer's Technical Support Team, per Manufacturer's requirements. When purchasing from Dollar Hobbyz, buyer agrees to contact manufacturer for all warranty issues and replacements.
International Buyers
International Buyers
All Import/Customs/VAT Fees are the responsibility of the buyer. Dollar Hobbyz takes no responsibility for these charges. It is the buyer's responsibility to know their own country's fees. All customs values will be listed at each product's purchase price.