The best products at the best prices since 2002!

Free USA Shipping on All Orders Over $49!

Same day shipping on orders placed by 2pm CST!

Shop by vehicle

Traxxas 77096-4 - X-Maxx 4X4 Monster Truck RTR

Traxxas 77096-4-RNR


$ 1,19995

Current Inventory: 1

Product Description +

X-Maxx® 8s monster truck, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz Radio System, VXL-8s Brushless Power System, belted Sledgehammer® tires, and clipless painted body.

Product Features +

  • 50+ mph with Two 4s LiPo Batteries and Included Optional Spur Gear
  • 8s LiPo compatible
  • Built-in cooling fan
  • Real-time telemetry via Traxxas Link
  • Machined heat sinks
  • 10-gauge silicone wire
  • Integrated protection circuits
  • LED status lights
  • “Big Block” brushless motor
  • 4-pole 1275 Kv
  • 5 mm output shaft
  • Aluminum slip-on heat sink
  • Dual motor cooling fans
  • Helps prevents spinouts and loss of control
  • Adjusts from off to 100% assistance from the transmitter
  • Traxxas Link™ enabled
  • 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
  • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
  • Multi-Function knob
  • Adjustable steering and throttle percentage (dual rates)
  • Adjustable steering and throttle sensitivity (exponential)
  • BEC Voltage and Motor Temperature Sensor installed
  • Quick one-hand installation and removal
  • Uses pivoting rear latch mechanism
  • Eliminates body posts and clips
  • Full-time shaft-driven 4-wheel drive
  • Heavy-duty Cush Drive™ with steel spur gear
  • Torque-Biasing Center Drive™ absorbs shocks and distributes power
  • Sealed, silicone fluid-filled diffs with large module ring and pinion gears
  • Splined outdrives attached with external thru-bolt method
  • Overdrive gearing pre-installed
  • Splined aluminum center driveshaft
  • Fully machined aluminum stub axles
  • 24 mm splined wheel hexes
  • Precision, preset gear mesh adjustments
  • No manual gear mesh adjustments are required
  • Motor retention separate from gear mesh
  • Interlocking front and rear bulkheads
  • Motor mounts to rear bulkhead to eliminate gear crunching flex
  • Easy to service and access components
  • Driveline is sealed in the chassis to keep out dirt and grit
  • No body clips or hook and loop straps
  • Battery hold-downs pivot for easy access
  • Adjustable for battery size
  • More secure than conventional retention systems
  • Integrated into chassis top brace for improved battery tray and chassis stiffness
  • Front energy absorbing rubber impact bumper
  • Lower front and rear skids for impact and abrasion resistance
  • Integrated nerf bars for side impact resistance
  • High-output steering servo
  • Wired directly into the receiver box (no external wires)
  • New mounting system to fully support case
  • Double-shear, bearing supported servo horn
  • All critical suspension points have double shear strength
  • High strength steel suspension pins used throughout
  • Suspension pins retainers won’t come loose or “back-out”
  • 4 mm machined pivot balls
  • Fixed, high-strength camber and toe links
  • Steel upper and lower tie bars
  • Full contact sealed bearings used in exposed locations
  • Machined aluminum threaded body
  • Extra-large bore and capacity
  • 5.2 mm damper shaft
  • Lower seal cartridge includes integrated wiper seal combination
  • Adjustable upper spring retainer
  • Plastic shock caps with pivot balls
  • Fixed shock locations
  • Lower spring perches bolted on
  • Massive 8.4″ Sledgehammer belted tires
  • Virtually eliminates ballooning at high speeds
  • Open tread block design
  • 2-piece foam insert
  • High-strength glue and bead design
  • Large, dual-diameter wheels

  • Product Specs +

  • Model Name: X-Maxx® 8s Belted
  • Type: Monster Truck
  • Model Speed: 50+ mph with two 4s LiPo batteries and optional speed gear
  • Scale: X-Truck
  • Weight: 19.1 pounds (8.66 kg)
  • Length: 30.67 inches (779 mm)
  • Width: 21.3 inches (540 mm)
  • Front Track: 21.3 inches (540 mm)
  • Rear Track: 21.3 inches (540 mm)
  • Height: 13.99 inches (355 mm)
  • Wheelbase: 18.92 inches (480 mm)
  • Center Ground Clearance: 4.2 inches (107 mm)
  • Drive System: Shaft-driven 4WD
  • Driveline: Shaft-driven 4WD
  • Transmission: Single speed
  • Differential Type: Sealed, hardened steel bevel, limited slip
  • Gear Pitch: 1.0 metric pitch
  • Steering Servo: 2085X metal gear ultra-high-torque waterproof
  • Radio System: TQi™ 2.4 GHz 2-channel transmitter with wireless module
  • Battery Compartment Specs: 197 mm X 52 mm X 44 mm
  • Motor Name: Velineon 1200XL
  • Motor Type: 1275 Kv sensorless brushless
  • Motor Weight: 23.44 ounces (665 g)
  • Motor Length: 4.32 inches (110 mm)
  • Motor Diameter: 1.88 inches (48 mm)
  • Motor Shaft Size: 5 mm
  • Motor Connector Type: 6.5 mm bullet connectors
  • ESC Name: Velineon VXL-8s™
  • ESC Type: Brushless
  • ESC Case Size: 2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm)
  • ESC Weight: 7.60 ounces (215.5 g)
  • ESC Motor Connectors: 6.5 mm bullet connectors
  • ESC Battery Connectors: Traxxas High-Current Connectors
  • ESC Power Wire: 10 gauge Maxx Cable

  • Included with Product +

  • (1) X-Maxx 8s monster truck with Traxxas Big Block brushless motor
  • (1) VXL-8s waterproof electronic speed control with integrated telemetry
  • (1) Quick Start Guide
  • (1) TQi 2.4 GHz radio system
  • High quality maintenance tools

  • Required to Use +

  • (2) 4-Cell LiPo batteries
  • Charger
  • (4) AA alkaline batteries

  • Eligible for Domestic Shipping Only +

    This product may only be shipped within the United States. International orders will be cancelled and refunded.

    Additional Product Details +

    Brand: Traxxas

    MPN: 77096-4-RNR

    Added: 2026 - October

    Status: Stock

    Discount Eligibility: Discount Ineligible

    SKU: TRA77096-4-RNR

    UPC: 020334064554

    Location: WH08-01-01

    Shipping Policies & Notices

    Delivery & Shipping

    • Free shipping on all orders over $49
    • Same day shipping on orders placed by 2pm CST, Mon-Fri
    • Free store pickup available at checkout

    Technical & Warranty Info

    Technical and Warranty issues are handled by the manufacturer's Technical Support Team, per Manufacturer's requirements. When purchasing from Dollar Hobbyz, buyer agrees to contact manufacturer for all warranty issues and replacements.

    International Buyers

    All Import/Customs/VAT Fees are the responsibility of the buyer. Dollar Hobbyz takes no responsibility for these charges. It is the buyer's responsibility to know their own country's fees. All customs values will be listed at each product's purchase price.